The computer found a broken (open) circuit to coolant bypass valve C, so it can't control that valve.
Fix soon. Book a shop visit this week. Stop driving if the car slips, shakes, overheats or warns you.
Failed coolant bypass valve/solenoid. Then: broken wire or loose connector at the valve; corroded connector pins.
Owners named P26B7 in 16 complaints to the U.S. government, most often on the Ford Escape.
Models that report it most
Complaints that name P26B7, by model. Raw counts, not a failure rate: popular models get more complaints. Tap a model for its years, mileage and what owners say fixed it.
P26B7 by model: P26B7 Ford Escape (15)
Symptoms owners describe with P26B7: Coolant leak · Engine overheating · Car stalls while driving
Years owners report it on most: 2013 Ford Escape · 2014 Ford Escape
The details
What P26B7 means
The computer found a broken (open) circuit to coolant bypass valve C, so it can't control that valve. The engine may warm slowly, run at an unstable temperature or, in bad cases, overheat.
Can I drive with P26B7?
Fix soon. Book a shop visit this week. Stop driving if the car slips, shakes, overheats or warns you.
56% of the owner complaints that name P26B7 also say the car overheats. A complaint can describe more than one problem, so this doesn't prove the code caused it.
Common causes of P26B7
- Failed coolant bypass valve/solenoid
- Broken wire or loose connector at the valve
- Corroded connector pins
- Engine computer driver fault (rare)
A shop should confirm the cause with a scan and tests before replacing parts.
What owners describe
- Overheats: 56% of complaints
- Stalls or shuts off: 12% of complaints
Share of complaints naming the code whose text also mentions each problem.
Model years that report P26B7 most
2013 Ford Escape (12), 2014 Ford Escape (2).
Related codes
P26AB P26A6 P26A5 P26A3 P26CB P2682 P2681 P2646
Quick answers
What does P26B7 mean?
Engine Coolant Bypass Valve C Control Circuit/Open. The computer found a broken (open) circuit to coolant bypass valve C, so it can't control that valve. The engine may warm slowly, run at an unstable temperature or, in bad cases, overheat.
Can I drive with P26B7?
Fix soon. Book a shop visit this week. Stop driving if the car slips, shakes, overheats or warns you.
What causes P26B7?
Failed coolant bypass valve/solenoid; Broken wire or loose connector at the valve; Corroded connector pins; Engine computer driver fault (rare).
Counts: NHTSA owner complaints whose text names P26B7. A complaint is an owner's report, not a diagnosis. Meanings: the standard SAE J2012 definitions in our own words; manufacturer codes only where verified for that make. General information, not repair advice for your car.
