The Lemon Index

Check engine light · Engine codes

P26A6: Engine Coolant Bypass Valve A Position Sensor Circuit Low.

Powertrain · GenericP26A6
Fix soon
What it means

The engine computer sees a voltage that is too low from the sensor that reports the position of the coolant bypass (coolant control) valve.

How serious

Fix soon. Book a shop visit this week. Stop driving if the car slips, shakes, overheats or warns you.

Where a shop starts

Failed coolant bypass valve or its internal position sensor. Then: broken internal gear in the coolant valve; wiring short or open in the sensor circuit.

Owners named P26A6 in 7 complaints to the U.S. government, most often on the Subaru Forester.

Cars owners report it on

Complaints that name P26A6, by model. Raw counts, not a failure rate: popular models get more complaints.

The details

What P26A6 means

The engine computer sees a voltage that is too low from the sensor that reports the position of the coolant bypass (coolant control) valve. The check engine light comes on, and engine warm-up or heat control may not work right.

Can I drive with P26A6?

Fix soon. Book a shop visit this week. Stop driving if the car slips, shakes, overheats or warns you.

43% of the owner complaints that name P26A6 also say the car loses power or goes into limp mode. A complaint can describe more than one problem, so this doesn't prove the code caused it.

Common causes of P26A6
  • Failed coolant bypass valve or its internal position sensor
  • Broken internal gear in the coolant valve
  • Wiring short or open in the sensor circuit
  • Poor connector contact

A shop should confirm the cause with a scan and tests before replacing parts.

What owners describe

Share of complaints naming the code whose text also mentions each problem.

Model years that report P26A6 most

2019 Subaru Forester (4), 2021 Subaru Crosstrek (2).

Related codes

P26A5 P26A3 P26AB P26B7 P2682 P2681 P26CB P2646

Quick answers

What does P26A6 mean?

Engine Coolant Bypass Valve A Position Sensor Circuit Low. The engine computer sees a voltage that is too low from the sensor that reports the position of the coolant bypass (coolant control) valve. The check engine light comes on, and engine warm-up or heat control may not work right.

Can I drive with P26A6?

Fix soon. Book a shop visit this week. Stop driving if the car slips, shakes, overheats or warns you.

What causes P26A6?

Failed coolant bypass valve or its internal position sensor; Broken internal gear in the coolant valve; Wiring short or open in the sensor circuit; Poor connector contact.

Counts: NHTSA owner complaints whose text names P26A6. A complaint is an owner's report, not a diagnosis. Meanings: the standard SAE J2012 definitions in our own words; manufacturer codes only where verified for that make. General information, not repair advice for your car.

Use this data free

Free to use with credit: Source: The Lemon Index (lemonindex.com). Get the data · Free images

Spot a mistake or have an idea?

How can we make Lemon Index better?