The stability control computer got a bad or uncalibrated signal from the sensor that reads which way the steering wheel is turned. Full C1231 page
10 owner complaints · the #4 code Toyota Sequoia owners name · 17% of Toyota Sequoia complaints that name a code (every car: 0.1%)
Middle of 57,000 miles · most between 40,000 and 82,000 (10 owners gave it)
Toyota Sequoia owners named C1231 in 10 complaints to the U.S. government (NHTSA), most often on the 2003 and 2001 model years, at a middle of 57,000 miles. The part they name most is the engine computer (ECM / PCM) (4 complaints). Complaints are owner reports, not proof of a defect.
Toyota Sequoia model years that report C1231
Owner complaints naming C1231, by model year. Raw counts: years that sold more get more complaints, so this is each model year's record, not a failure rate.
Mileage when it happened
57,000 miles is the middle of what 10 owners entered. Half were between 40,000 and 82,000 miles.
The mileage on the complaint form, when the owner gave one.
What owners say caused it or fixed it
The most-named part is the engine computer (ECM / PCM), in 4 of the 10 complaints (40%). 4 of those mention it being replaced or repaired, and 1 say the problem came back afterwards. Next: power steering part (3).
- Engine computer (ECM / PCM)4 complaints4 mention a repair or replacement, 1 of them says the problem came back · what Toyota Sequoia owners paid
- Power steering part3 complaints3 mention a repair or replacement, 1 of them says the problem came back
3 complaints mention a recall.
Counted from the owners' own words: a part counts when a sentence names it with a cause or repair word. What owners wrote, not a diagnosis. A shop should confirm the cause before replacing parts.
Symptoms owners describe with C1231
10% of these complaints say the check engine light came on.
- Brakes or ABS act up70%7 of 10 complaints
- Stalls or shuts off20%2 of 10 complaints
Share of the complaints naming C1231 whose text also describes each problem. A complaint can describe more than one.
Codes owners report with it
Other codes named in the same Toyota Sequoia complaints, and in how many.
Repair costs
Toyota Sequoia ECM (engine computer) replacement cost
Recalls on these Toyota Sequoia years
- Brakes · 2001 · issued 2007
CERTAIN CARDONE MASTER CYLINDERS WITH PART NUMBERS 10-2925, 10-2987, 10-2987MZA, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, AND 11-3156, AND WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUI… NHTSA 07E023000
1 recall for the same systems (brakes) on the Toyota Sequoia model years above. A recall for the same system isn't proof it's behind C1231. Recall work is free at any dealer: check a VIN at nhtsa.gov/recalls or with our VIN check.
Keep going
- C1231: meaning, causes and every car that reports it
- Toyota Sequoia reliability by year
- 2003 Toyota Sequoia problems and recalls
Other codes Toyota Sequoia owners report
The details
How we count
We read every owner complaint in the NHTSA file whose text names this trouble code, and count the ones filed about this model (matched by the make, model and model year on the complaint). Mileage is what the owner entered on the form.
Parts: a complaint counts for a part when one of the owner's own sentences names that part together with a cause word (failed, bad, diagnosed, caused by, leaking ...) or a repair word (replaced, repaired, new, reprogrammed ...). "Came back" means the same complaint also says the problem returned or the repair didn't fix it. These are counts of what owners wrote, not a diagnosis, and one complaint can name several parts.
Complaints are reports, not proof of a defect, and most owners never file one. Popular models get more complaints, so the counts are not a failure rate. The code meaning is the standard SAE J2012 definition in our own words, or the carmaker's meaning where we verified it for that make.
What C1231 means
The stability control computer got a bad or uncalibrated signal from the sensor that reads which way the steering wheel is turned. VSC/TRAC lights come on and stability control may act wrongly or switch off.
Fix soon. Book a shop visit this week. Stop driving if the car slips, shakes, overheats or warns you.
- Steering angle sensor not calibrated (center point not stored)
- Faulty steering angle sensor or its wiring
- Skid control computer software (2003 Sequoia recall/bulletin)
Check the complaints yourself
NHTSA complaint numbers (search them at nhtsa.gov): 10531943, 10456637, 10413861, 10363547, 10297933, 10294053, 10244396, 10231215, 10185717, 10171069.
Quick answers
What does C1231 mean on a Toyota Sequoia?
Steering Angle Sensor Circuit Malfunction. The stability control computer got a bad or uncalibrated signal from the sensor that reads which way the steering wheel is turned. VSC/TRAC lights come on and stability control may act wrongly or switch off.
Which Toyota Sequoia years have the most C1231 complaints?
In complaints to NHTSA, owners of the 2003 (9), 2001 (1) Toyota Sequoia named C1231 most (10 complaints in all, 2001–2003). Raw counts, not a failure rate.
What fixes C1231 on a Toyota Sequoia?
Owners most often name the engine computer (ECM / PCM) (4 of 10 complaints), then power steering part. That's what owners wrote, not a diagnosis: have a shop confirm the cause with a scan and tests before replacing parts.
At what mileage does C1231 show up on a Toyota Sequoia?
Owners who gave their mileage reported a middle of 57,000 miles; half were between 40,000 and 82,000 (10 owners).
Can I drive my Toyota Sequoia with C1231?
Fix soon. Book a shop visit this week. Stop driving if the car slips, shakes, overheats or warns you.
Sources: NHTSA owner complaints that name C1231 on the Toyota Sequoia, counted by The Lemon Index; NHTSA recalls; repair bills owners named. Meanings: SAE J2012 in our own words. Owner reports, not a diagnosis or repair advice for your car.