Mazda RX-7 FD problems and recalls
Known issues
- Apex and side seals (low compression)Outlet report
PistonHeads says a compression test shows whether the apex and side seals are wearing out. Readings of 7 to 8 bar are good; lower is a concern, and a low reading means a rebuild is likely.
Fix: Rebuild the engine.
3 owner complaints to NHTSA mention it (1993–1995) - Vacuum hoses (the rat's nest)Outlet report
The sequential turbos are run by a rat's nest of 67 vacuum hoses, says Driving Line. Sports Car Market says engine heat made the hoses shrivel up and fail.
Fix: Replace the vacuum hoses with strong synthetic rubber ones.
2 owner complaints to NHTSA mention it (1993–1995) - Coolant seals and air separator tankOutlet report
PistonHeads says steam from the exhaust at start-up points to coolant seals going brittle with age and heat. The air separator tank can split and leak coolant.
5 owner complaints to NHTSA mention it (1993–1995)
Owner complaints to NHTSA
102 complaints for 1993–1995.
What they're about
Recalls
- 00E069000 Latches/Locks/Linkages1993–1995
Equipment description: mazda speed resinous hoods, designed and sold as accessory parts for model year 1992-1995 rx7 vehicles, manufactured between june 1, 1997, through september 19, 2000.
- 94V094000 Engine And Engine Cooling1993–1994
The radiator cap pressure relief valve release pressure is set too high.
- 96V149000 Service Brakes, Hydraulic1993–1995
Oil mist contained in the engine intake air can collect over time in the brake vacuum check valve preventing the check valve from opening at the specified pressure reducing power assist to the brakes.
- 95V069000 Fuel System, Gasoline1993–1994
Residual engine heat can cause premature deterioration of the fuel hose causing the hose to leak.
Source: NHTSA (api.nhtsa.gov). Check a VIN for open recalls on one car.