The transmission computer found a fault with pressure control solenoid D, which sets hydraulic pressure for shifting.
Get it fixed soon. A few more days of normal driving is usually OK, but waiting can turn a small repair into a bigger one or a breakdown.
Failed pressure control solenoid D. Then: dirty fluid or clogged filter; valve body or pump problem.
Owners named P2713 in 5 complaints to the U.S. government, most often on the Toyota Highlander.
Cars owners report it on
Complaints that name P2713, by model. Raw counts, not a failure rate: popular models get more complaints.
Symptoms owners describe with P2713: Transmission slipping · Car loses power while driving · All dashboard warning lights on
The details
What P2713 means
The transmission computer found a fault with pressure control solenoid D, which sets hydraulic pressure for shifting. Shifts may slip or feel harsh, and the transmission may go into limp mode or run hot.
Can I drive with P2713?
Get it fixed soon. A few more days of normal driving is usually OK, but waiting can turn a small repair into a bigger one or a breakdown.
80% of the owner complaints that name P2713 also say the car transmission slips or shifts hard. A complaint can describe more than one problem, so this doesn't prove the code caused it.
Common causes of P2713
- Failed pressure control solenoid D
- Dirty fluid or clogged filter
- Valve body or pump problem
- Wiring or connector damage
A shop should confirm the cause with a scan and tests before replacing parts.
What owners describe
- Transmission slips or shifts hard: 80% of complaints
- Loses power or goes into limp mode: 80% of complaints
- Warning lights and electrical faults: 40% of complaints
Share of complaints naming the code whose text also mentions each problem.
Related codes
P2714 P2711 P2715 P2716 P2704 P2703 P2723 P2701
Quick answers
What does P2713 mean?
Pressure Control Solenoid D. The transmission computer found a fault with pressure control solenoid D, which sets hydraulic pressure for shifting. Shifts may slip or feel harsh, and the transmission may go into limp mode or run hot.
Can I drive with P2713?
Get it fixed soon. A few more days of normal driving is usually OK, but waiting can turn a small repair into a bigger one or a breakdown.
What causes P2713?
Failed pressure control solenoid D; Dirty fluid or clogged filter; Valve body or pump problem; Wiring or connector damage.
Counts: NHTSA owner complaints whose text names P2713. A complaint is an owner's report, not a diagnosis. Meanings: the standard SAE J2012 definitions in our own words; manufacturer codes only where verified for that make. General information, not repair advice for your car.
